0Cart

Electrical

Sort by:
Oldest Items First
Show:
12
Cable Zip Tie Black - 10 Pack
Tidy up the wiring inside your tank with these cable zip ties. Includes: 10 x Cable Zip Tie - Size: 98mm x 2.5mm (Colour = Black)
$0.50
In Stock
+ −
Genuine Taigen IR Emitter & IR Receiver Cable
This is the cable used for infrared battling. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is mainly used for replacements or Airsoft to Infrared...
$7.00 $5.00
You save: $2.00
In Stock
+ −
Tiger I Metal Hull MG With Base And LED For 1/16 Heng Long Taigen Torro RC Tank
Upgrade your 1/16 scale Tiger I RC Tank now with this metal hull machine gun with metal base and LED light. Suits Heng Long, Taigen, Torro, Tamiya. Includes: 1 x Tiger I Metal Hull MG With Base And LED
$9.00
In Stock
+ −
Replacement Standard 3mm LED Pair RED for RC Tank Rear Lights
Replacement Standard 3mm LED Pair RED for RC Tank Rear Lights. Suit: Heng Long, Taigen, Torro and Tamiya. Includes: Standard 3mm Red Led x 2 Cables NOT included
$1.60
In Stock
+ −
Heng Long 8 Pin Turret Connector v4
Heng Long
Replacement turret connector for your Heng Long 1/16 scale RC Tank v5.3 MFU 1 x 8 pin port 3 x 2 pin port 1 x 3 pin port
$4.00 $2.00
You save: $2.00
In Stock
+ −
Taigen Infrared Main Power Cable (Tamiya Plug) with Ground
Replacement main power cable for Heng Long, Taigen or Torro 1/16 RC tanks. This particular version has an extra ground cord (yes the cord is red), that connects to a Taigen infrared/recoil firing unit. This power cable is also compatible with non-IR tanks as well, simply tape off the extra...
$6.00
In Stock
+ −
Hobby RC Receiver 6 CH Wiring Kit for use with TAIGEN V3 and Clark TK
This is the wiring kit used to connect your own PWM type receiver to the Taigen V2 or V3 motherboards. This consists of 6 PWM cables and a bind plug for the Taigen motherboard. When the bind plug is inserted the motherboard will use the PWM cables for control. When the small bind plug is not...
$22.00
In Stock
+ −
Taigen Sound Card For v3 Multifunction Unit - Tiger I Sounds
Taigen sound card for the Taigen v2/v3 electronics. This is the Tiger I Maybach 210 12 cylinder Gas Engine version. This item is plug and play with the TAIGEN v2/v3 electronics but will not work with the older v1 systems (onboard sound). Please make sure you have a v2 or v3 TAIGEN...
$36.00 $29.00
You save: $7.00
In Stock
+ −
Heng Long Barrel Elevation Unit For 1/16 RC Tank StuG, Panther G, Sherman TK-BX007
Heng Long
Replacement barrel elevation unit for Heng Long v5.3, TK 6.0/6.1 series 1/16 scale RC tanks. Suits the following tanks: Sturmgeschütze (StuG) III - 3868 Panther G - 3879 M4A3 Sherman - 3898
$9.00
In Stock
+ −
Clark Model TK Board Mounting Screws - Set Of 3
Clark Model
Three screws for mounting your TK board to base plate
$1.50
In Stock
+ −
Resistors for Clark TK22 Control Board - Set Of 3
Clark Model
Resistors for Clark TK22 Control Board - Set Of 3
$2.50
In Stock
+ −
Mato High Quality 35mm Speaker w/Enclosure For 1/16 Heng Long, Taigen RC Tanks
35mm full range speaker for your 1/16 RC Tank
$16.00 $12.00
You save: $4.00
In Stock
+ −
Electrical Category
Only Show Instock
By Tank/Vehicle
By Brand