Hobby RC Receiver 6 CH Wiring Kit for use with TAIGEN V3 and Clark TK
This is the wiring kit used to connect your own PWM type receiver to the Taigen V2 or V3 motherboards.
This consists of 6 PWM cables and a bind plug for the Taigen motherboard. When the bind plug is inserted the motherboard will use the PWM cables for control. When the small bind plug is not plugged in the Taigen motherboard will use the internal RF system and look for the stock transmitter.
6 x PWM channel wires with connectors
1 x Bind Plug (for use with TAIGEN v3 Motherboard only (see descrition above)
No posts found