Taigen

Taigen manufacture a range of 1/16 scale radio controlled tanks, parts and accessories.

Updated air filter hoses for the 1/16 Tiger 1 Early Version tanks. These replacement air hoses replace the stock hoses on the tank and are much more realistic. The new hoses are textured and weaved versus the old smooth hard rubber. Please note: The hoses do not come with the end caps so...
$8.00
In Stock
+
A set of 5 S-Mine Launchers for the Taigen 1/16 Tiger I RC Tank. Includes: 5 x S-Mine Launchers Some modification to the set may be needed for fitting to Heng Long Tiger I.  The Minenabwurfvorrichtung was a simple device consisting of a small steel tube oriented at a 50° angle...
$6.00
In Stock
+
Replacement pair of plastic rear mud guards (flaps) for the Taigen 1/16 Tiger I RC tank. May also fit Heng Long and Torro Tiger I tanks. Includes: 1 x mud guard (left) 1 x mud guard (right)
$4.00
In Stock
+
1/16 scale American style tank commander with binoculars - Factory Painted. This is a half figure and will sit in most cupolas. Includes: 1 x Tank Commander Figure 1 x Binoculars 1 x Square of double sided tape
$6.00
Out of stock
Replacement plastic bucket for your 1/16 scale rc tank. Includes: 1 x plastic bucket
$3.00
In Stock
+
Replacement plastic lifting jack for your 1/16 scale Taigen Tiger I RC Tank (Mid/Late). Includes: 1 x Plastic lifting jack
$4.00
In Stock
+
Replacement turret detal set with metal rails for the Taigen 1/16 T34/85 RC Tank. Includes: 3 x Metal rails (part A6) 1 x Turret detail sprue (part A3 x 7) 1 x Turret detail sprue (part A7 x 5) 1 x Plastic aerial  ALL parts supplied are not painted   
$5.50
In Stock
+
Replacement plastic tracks links for your 1/16 scale Taigen Tiger I RC Tank Mid/Late version. Includes: 2 x Plastic Track Link 4 x track pins  
$1.50
In Stock
+
A set (pair) of copper stranded tow cables for the Heng Long or Taigen 1/16 Panther G RC tanks. Would also suit Jagdpanther Includes: Metal Tow Cable x 2 (1 pair)
$12.50
Out of stock
Metal MG34 With Cupola mount for the Taigen 1/16 Tiger I RC Tank (Mid/Late Version). Designed to fit the late style commanders cupola. Includes: 1 x MG34 (metal) 1 x cupola ring mount (metal)
$6.50
Out of stock
Replacement metal track link for your 1/16 scale Taigen Tiger I RC Tank Mid/Late version. Includes: 1 x METAL Track Link 2 x track pins
$1.00
In Stock
+
Replacement tow cable pair for the 1/16 Taigen or Tamiya Russian JS-2 RC Tank. Includes: 1 x pair of tow cables with mounting hooks (approx. 23.5cm in length)
$12.00
In Stock
+
A set (pair) of copper stranded tow cables for the Heng Long, Taigen or Tamiya 1/16 German Leopard 2A6 RC tanks. Includes: 2 x copper stranded tow cables (1 pair)
$12.00
Out of stock
A metal hatch set for the 1/16 Torro King Tiger Henschel Turret and Torro Jagdtiger RC tank. This set includes the radio operator and the driver's hatches, as well as the engine hatch and hinges. Installation hardware also included. Also suit Tamiya and/or Heng Long King Tiger (Henschel)...
$22.00
In Stock
+
A 16 piece metal accessory and tool kit for the Taigen/Torro 1/16 King Tiger RC tank. Includes: Turret fittings including vents and ports Upper hull fittings and tools Metal headlight with LED and wires.  
$26.00
In Stock
+
This is a set of 12 grub screws used for various purposes across all Taigen Tanks. These grub screws are used on many tanks including the Tiger 1, Panzer III Metal Edition, KV-1, King Tiger, Panther G, Panther F, T-34/85, Sturmtiger, KV-2, and Jagdtiger. The main usage for these grub screws...
$8.00
In Stock
+
Metal engine and transmission covers for the 1/16 Heng Long and Taigen Tiger I RC Tanks. Includes: 1 x Engine Air Intake Cover for Mid & Late Production 2 x Transmission Covers (left/right)
$6.00
In Stock
+
Wooden Ammunition crate in 1/16 scale. Great for adding a little extra detail to your rc tank, model or diorama. Includes: 1 x Ammunition crate  
$9.00
Out of stock
A pair of copper stranded 1/16 scale metal tow cables for the Heng Long or Taigen T34-85 RC tank. Designed specifically for the T34. See image Included: 1 x pair of tow cables (approx 28.5cm Length).
$10.00
Out of stock
A set (pair) of copper stranded tow cables for the Heng Long or Taigen 1/16 Panzer III and Sturmgeschutz III RC tanks. These tow cables are just a bit thinner and shorter than the Tiger 1 tow cables (TAG120010) and average about 36cm long.
$12.00
Out of stock
A set (pair) of copper stranded tow cables for the Heng Long or Taigen 1/16 Tiger I RC tanks. Would also suit King Tiger. Approx. 53cm in length Includes: Metal Tow Cable x 2 (1 pair)
$12.50
In Stock
+
Set of flexible vinyl sheets simulating zimmerit, a non-magnetic paste which was applied to panzers from 1943 to late 1944 as a measure against magnetic mines. Would suit Taigen, Torro, Heng Long, or Tamiya 1/16 scale RC tanks. The sheets are pre-coloured light-grey and cut to fit...
$14.00
Out of stock
Add some character to your 1/16 Heng Long , Tamiya, T aigen or Torro Tiger I A set of four metal tow hooks. Suitable for: Tiger 1 King Tiger, Panther G Jagdpanther Some tanks may require you to drill out the hole a bit for a proper fit. Includes: 4 x Metal Tow Shackle...
$6.00
In Stock
+
Taigen 1/16 scale Tiger 1 turret fittings for a late war German Tiger 1. Suits: Taigen, Tamiya & Heng Long 1:16 Tiger I tanks Includes : Fan cover, Periscope Cover, and Weapon Thrower.    
$4.00 $3.00
You save: $1.00
In Stock
+
A set of metal driver and radio operator hatches for the Heng Long and Taigen 1/16 Tiger 1 RC tanks. Includes: 2 x Hatches with mounting hinges (Driver and radio operator)  
$7.00
In Stock
+
Well detailed metal ( MG 34 Panzerlauf style ) machine gun with LED light embedded in it. Fits Taigen/Torro 1/16 Tiger I RC tank. Will also fit Heng Long and Tamiya 1/16 Tiger I with some modification. Requires 4mm hole. Note: This item does not come with a plug and will need to be...
$8.00
Out of stock
1/16 scale German Tank Commander with headphones - Factory Painted. This is a half figure and will sit in most cupolas. Includes: 1 x Tank Commander Figure 1 x Headphones 1 x Square of double sided tape
$6.00
In Stock
+
Add some detail to your Heng Long, or Taigen 1/16 Panzer III with this photo etch grill/mesh screen set. Includes: 1 x photo etched sheet
$14.00
In Stock
+
Add some detail to your 1/16 scale Heng Long, Taigen, or Tamiya Tiger I RC Tank or model with this Photo Etched Grill/mesh screen set. Includes: 1 x photo etch sheet  
$12.00
Out of stock
Photo Etched Grill/mesh screen set for 1/16 Heng Long, Taigen and Tamiya King Tiger rc tanks. Suits both Henschel and Porsche turret King Tiger rc tanks. Includes: 2 x photo etch grill sheets
$22.00
Out of stock
Add some detail to your 1/16 scale Heng Long or Taigen T-34/85 with this Photo Etched anti mine mesh/grill set. Includes: 1 x Photo Etched Mesh Grill  
$12.00
In Stock
+
Taigen sound card for the Taigen v2/v3 electronics. This is the Tiger I Maybach 210 12 cylinder Gas Engine version. This item is plug and play with the TAIGEN v2/v3 electronics but will not work with the older v1 systems (onboard sound). Please make sure you have a v2 or v3 TAIGEN...
$36.00 $29.00
You save: $7.00
In Stock
+
Taigen sound card for the Taigen v2/v3 electronics. This is the Panzer III/Panzer IV Maybach 120 12 cylinder Gas Engine version. This item is plug and play with the TAIGEN v2/v3 electronics but will not work with the older v1 systems (onboard sound). Please make sure you have a v2 or v3...
$36.00 $29.00
You save: $7.00
In Stock
+
Replacement set of stickers/decals found in the Taigen 1/16 Tiger I RC Tank kit. Features 4 additional turret number pairs, as well as the original Heng Long 3818 number, the  s. Pz Abt. 505  unit insignia and 2 different sized Balkenkreuz sets
$4.00
In Stock
+
A set of 7 tracks for the late version Tagien Tiger 1 RC tank. These 7 track links also come with mounting hardware to mount to the turret. This item is compatible with the late plastic and late metal Tiger 1 models. Includes: Metal Track links (unainted)x 7 - colour = grey Mounting...
$12.00
Out of stock
Electrical Category
Only Show Instock
By Tank/Vehicle
By Scale