0Cart

Parts & Upgrades

Sort by:
Position: Low to High
Show:
40
Heng Long 1/16 Idler Wheel Replacement 3mm Washers
Heng Long
These are the washers that sit in between the Idler wheel and the hull on your Heng Long 1/16 scale RC tank. Includes: 2 x Idler wheel washer (1 pair )  
$1.00
In Stock
+ −
Mato Metal 1/16 5 Gallon Jerry Can German Style
Mato Metal 1/16 - 5 Gallon Jerry Can German style ( Einheitskanister) . Great little accessory for adding detail to your Mato, Heng Long, Taigen or Tamiya 1/16 German RC tank
$3.00
In Stock
+ −
Heng Long Road Wheel Axle Set For 1/16 Tiger I RC Tank
Heng Long
Replacement road wheel axle set for your Heng Long 1/16 scale Tiger I Includes: 16 x Road Wheel Axles    
$8.00
In Stock
+ −
Mato Metal Turret Pistol Port For 1/16 Scale Heng Long Tiger I
(1)
Metal turret side pistol port for Heng Long 1/16 RC German Tiger 1 tank 3818. Includes: 1 x Turret Metal Pistol Port
$5.00
In Stock
+ −
Mato Metal Upper Hull MG for 1/16 Heng Long Panzer III
Mato Metal Upper Hull MG for 1/16 Heng Long Panzer III
$5.00
In Stock
+ −
Metal Headlights with LED for 1/16 Heng Long or Taigen Tiger I RC Tank By MATO
(2)
Metal headlight with LED set for your Heng Long or Taigen 1/16 scale Tiger I RC Tank from MATO. Includes 2 x Metal Headlight 2 x LED with wires (wire colour may vary from image)
$8.00
In Stock
+ −
Mato Metal Barrel Muzzle For 1/16 Heng Long Panther G And Jagdpanther RC Tank
Upgrade your 1/16 Heng Long Panther G or Jagdpanther RC Tank now with this metal barrel muzzle break. Includes: 1 x Metal Barrel Muzzle    
$6.00
In Stock
+ −
Metal Front Track Plate For Heng Long 1/16 Tiger I RC Tank
Replace the plastic spare track retainer with this metal spare/front track retainer plate/mount for Heng Long 1/16 Tiger I RC tank. Compatible with: Heng Long 1:16 Tiger I (3818-1) Mato 'All Metal' 1:16 Tiger I  
$6.00
In Stock
+ −
Metal Front Spare Track Plate For Heng Long 1/16 Panzer III RC Tank - MT083
Metal spare/front track retainer plate for Heng Long 1/16 Panzer III RC tank. Compatible with: Heng Long 1/16 Panzer III (3848-1) Mato 'All Metal' 1/16 Panzer III
$6.00
In Stock
+ −
Heng Long 1/16 Panzer III Plastic Road Wheel Pair With Suspension Arms
Heng Long
Replacement plastic road wheel pair with suspension arms for your 1/16 Heng Long Panzer III RC Tank. Includes: 2 x Plastic road wheel (colour may vary) 2 x Suspension Arm
$3.00
In Stock
+ −
Metal Drive Sprockets And Idlers For Heng Long 1/16 Challenger 2 RC Tank
Upgrade the plastic drive sprockets and idlers on your Heng Long 1:16 scale Challenger 2 RC tank with this metal drive sprocket and idler wheel set from Mato Includes: 2 x Drive Sprocket 2 x Idler Wheels example installation only - tank NOT included
$16.00
In Stock
+ −
Heng Long 1/16 Panzer And Stug III R/C Tank Metal Return Roller Mounts MT025
Beef up your Heng Long 1:16 Panzer III and/or Stug III r/c tank with this Metal Return Roller Mount set from Mato. Includes: Roller Mounts x 6 Mounting screw x 3 Large nut x 5 small nut x 18
$10.00
In Stock
+ −
Heng Long 1/16 M26 Pershing Snow Leopard Plastic Drive Sprocket
Heng Long
Replacement plastic drive sprocket pair for your 1:16 scale Heng Long M26 Snow Leopard
$5.00
In Stock
+ −
Replacement Rubber Tyres For 1/16 Heng Long, Mato, Taigen Panzer or StuG III RC Tank
Set of 6 replacement road wheel rubber tyres for the 1/16 scale Panzer III or StuG III radio controlled tank metal road wheels. Each road wheel has 2 tyres (inner and outer). This set will fit 3 road wheels. Includes: 6 x rubber tyres  
$6.00
In Stock
+ −
Heng Long Barrel Elevation Unit For 1/16 TK6.0 Tiger I And King Tiger RC Tanks
Heng Long
Replacement barrel elevation unit for the Heng Long 1/16 scale Version TK6 Series Tiger I and King Tiger RC tanks. Suits the following tanks: Tiger I - Version 6.0 King Tiger - Version 6.0 T-72 Includes: 1 x Barrel elevation unit with wire and 2pin plug (for connection to...
$9.00
In Stock
+ −
Heng Long Motor BB Unit For 1/16 RC Tanks
Heng Long
Replacement BB motor unit for your 1/16 scale TK6 series or TK7.0 or TK7.1 Heng Long RC tank. Includes: 1 x BB Firing Motor unit with 2pin trigger (CN6) and 2pin motor wires (CN10)
$15.00
In Stock
+ −
Heng Long 1/16 German Tiger I (Late) Metal Cupola For RC Tank MT046
(2)
For those wanting to model their German Tiger 1 RC tank as a Mid/Late war version . Will suit Heng Long or Taigen Includes: 1 x Commanders Cupola for Heng Long and Taigen 1:16 scale Tiger I.   Some modification to your tank may be needed for installation. Original cupola is glued...
$12.00
In Stock
+ −
Mato 1/16 Metal Early Cupola for Heng Long Tiger I RC Tank
(1)
Metal commanders cupola for the Heng Long and Taigen 1:16 scale Tiger I RC tank. Hatch opens and closes Includes: 1 x metal cupola
$12.00
In Stock
+ −
Heng Long Turret Rotation/Traverse Motor Unit For 1/16 RC Tanks
Heng Long
Replacement turret rotation/traverse motor unit for your 1/16 Heng Long RC Tanks For use with v5.3 and newer TK6 series Includes: 1 x rotation/traverse unit with cable and plug  
$9.00
In Stock
+ −
Replacement Standard 3mm LED Pair RED for RC Tank Rear Lights
Replacement Standard 3mm LED Pair RED for RC Tank Rear Lights. Suit: Heng Long, Taigen, Torro and Tamiya. Includes: Standard 3mm Red Led x 2 Cables NOT included
$1.60
In Stock
+ −
Heng Long 8 Pin Turret Connector v4
Heng Long
Replacement turret connector for your Heng Long 1/16 scale RC Tank v5.3 MFU 1 x 8 pin port 3 x 2 pin port 1 x 3 pin port
$4.00 $2.00
You save: $2.00
In Stock
+ −
Taigen Sound Card For v3 Multifunction Unit - Tiger I Sounds
Taigen sound card for the Taigen v2/v3 electronics. This is the Tiger I Maybach 210 12 cylinder Gas Engine version. This item is plug and play with the TAIGEN v2/v3 electronics but will not work with the older v1 systems (onboard sound). Please make sure you have a v2 or v3 TAIGEN...
$36.00 $29.00
You save: $7.00
In Stock
+ −
Heng Long Smoker Generator Unit For TK6.0s, TK6.1s, TK7.0 Version MFU RC Tanks
Heng Long
(1)
Replacement smoke generator unit for your Heng Long 1/16 TK6.0s or TK6.1s or TK7.0 or TK7.1 equipped RC tank. Also compatible with ElMod FUSION ECO/PRO (Rev. F only) boards.   will NOT work with Heng Long v5.3 MFU or older. Includes: 1 x Smoke Unit (fluid tank may vary in colour) 2...
$14.00
In Stock
+ −
Heng Long IR Receiver Tower For 1/16 TK6 TK7 Series RC Tanks
Heng Long
Heng Long battle unit for use with the 6 series and newer MFUs.  Suitable for the following Heng Long Multifunction boards: TK6.0, TK6.0S | TK6.1, TK6.1S  | TK7.0 Includes: IR Receiver Unit with wire and magnetic base
$12.00
In Stock
+ −
Heng Long TK6.0/S TK7.0 Version Cable Wiring Kit For 1/16 RC Tanks
Heng Long
Cable set/wiring kit for Heng Long TK6.0/S and TK7.0* series RC Tanks. Some cables are also suited to TK6.1/S - please see below. This kit includes: 1 x Tamiya style battery connector with wires 1 x 3pin plug with cable for IR Receiver ( female plug will fit IR tower but larger...
$25.00
In Stock
+ −
Taigen Sound Card For v3 Multifunction Unit - Panzer III Sounds
Taigen sound card for the Taigen v2/v3 electronics. This is the Panzer III/Panzer IV Maybach 120 12 cylinder Gas Engine version. This item is plug and play with the TAIGEN v2/v3 electronics but will not work with the older v1 systems (onboard sound). Please make sure you have a v2 or v3...
$36.00 $29.00
You save: $7.00
In Stock
+ −
Mato 1/16 Metal Sherman Firefly BB Barrel For Heng Long M4A3 RC Tank
17-pounder (76.2 mm) style main gun barrel and muzzle break for your Heng Long, Taigen or Mato 1/16 Sherman RC tank. Includes: 1 x metal barrel with muzzle break attached.
$16.00
In Stock
+ −
Metal Road Wheels For Heng Long 1/16 M1A2 Abrams RC Tank
Upgrade your 1/16 Heng Long 3918-1 American M1A2 Abrams RC Tank with this high quality metal road wheel set from Mato Toys. Includes bearings for smoother running   Please note: Will NOT fit newer Heng Long metal swing arms on 6.0 version tanks. What's included: Metal Road...
Temporarily Unavailable
In Stock
Heng Long Barrel Elevation Unit For 1/16 RC Tank StuG, Panther G, Sherman TK-BX007
Heng Long
Replacement barrel elevation unit for Heng Long v5.3, TK 6.0/6.1 series 1/16 scale RC tanks. Suits the following tanks: Sturmgeschütze (StuG) III - 3868 Panther G - 3879 M4A3 Sherman - 3898
$9.00
In Stock
+ −
Heng Long Barrel Elevation Unit (Small) For 1/16 RC Tanks
Heng Long
Replacement barrel elevation unit for Heng Long 1/16 scale RC tanks. Unit includes 2 pin plug for v5.3 or newer Heng Long MFU Suits the following tanks: Panzer III Panzer IV Jagdpanther KV-1 Type 99/99A T-34  
$9.00
Out of stock
Mato Metal Muzzle Break For Heng Long 1/16 Tiger I RC Tank
(1)
Upgrade your Heng Long 1/16 Tiger I now with this metal barrel muzzle break. Includes: 1 x Metal Barrel Muzzle  
$6.00
In Stock
+ −
Heng Long 1/16 Tiger I Metal Hull MG with Base
(2)
Upgrade your 1/16 scale Heng Long Tiger I with this metal hull machine gun with metal base.
$3.00
In Stock
+ −
Metal Drive Sprockets & Idler Set For Heng Long 1/16 Leopard 2A6 MT153
Upgrade the plastic drive sprockets and idlers on your Heng Long 1:16 scale Leopard 2A6 with this metal drive sprocket and idler wheel set from Mato. Includes: 2 x Drive Sprocket 2 x Idler Wheels Fitting instructions can be viewed here (opens in new browser window)
$16.00
In Stock
+ −
M41 Walker Bulldog Metal Drive Sprocket Pair For Heng Long 1/16 RC Tank
Upgrade your M41 Bulldog plastic drive sprockets with this durable metal set from Mato Toys. It is suitable for the 1/16 Heng Long M41 Walker Bulldog RC tank 3839. Package Included: 2 X Metal Driving Wheel
$12.00
In Stock
+ −
Metal Drive Sprockets For Heng Long 1/16 Panzer IV RC Tank
Metal drive sprockets for your 1/16 Heng Long Panzer IV F1 or F2 RC tank. Includes: 2 Metal Driving Sprockets 2 x Screws with washers 2 x Metal Caps 
$12.00
In Stock
+ −
Metal Idler Wheel Set For 1/16 Heng Long Panzer IV RC Tank
Metal Idler Wheel Set for your 1/16 Heng Long Panzer IV F1/F2 RC tank. Includes: 2 x Metal Drive Sprocket 2 x screws
$8.00
In Stock
+ −
Mato Metal Drive Sprocket Set For Heng Long 1/16 Russian T-90 & T-72 RC Tanks
Upgrade the plastic drive sprockets on your Heng Long 1/16 scale Russian T-90 and/or T-72 RC tank with this metal drive sprocket set from Mato. Suits T-90 and T-72  Includes: 2 x Drive Sprockets 2 x Metal caps 2 x Sprocket screws Fitting...
$12.00
In Stock
+ −
Metal Idler Wheel Set For 1/16 Heng Long T-90 & T-72 RC Tank
Upgrade the plastic idler wheels on your Heng Long 1/16 scale Russian T-90 and/or T-72 RC tank with this metal idler wheel set from Mato. Includes: 2 x Metal Idler Wheel 2 x metal caps Fitting instructions can be viewed here (opens in new browser window)
$8.00
In Stock
+ −
Metal Drive Sprocket Set For Heng Long 1/16 Russian KV-1 RC Tank
Upgrade your Russian KV-1 plastic drive sprockets with this durable metal set from Mato Toys. It is suitable for the 1/16 Heng Long Russian KV-1 Package Included: 2 X Metal Driving Wheel 2 x Sprocket caps Fitting Instructions can be viewed here (opens in new browser window)
$12.00
In Stock
+ −
Metal Idler Wheel Set For Heng Long 1/16 Russian KV-1 RC Tank
Upgrade your Russian KV-1 plastic idler wheels with this durable metal set from Mato Toys. It is suitable for the 1/16 Heng Long Russian KV-1 Package Included: 2 X Metal Idler Wheels (with bearings) Fitting Instructions can be viewed here (opens in new browser window)
$8.00
In Stock
+ −
Only Show Instock
By Tank/Vehicle
By Scale
By Brand