ELECTRICAL

TKSCREWS
Three screws for mounting your TK board to base plate
In Stock
$1.50
+
DCBOOSTER
DC To DC Voltage Booster/Regulator
Out of stock
$8.00
TAGVOL
Volume Control Knob With 3pin Connector
Scale1/16
In Stock
$5.00
+
TK-EC022
2pin red/black wire - ideal for power and/or gearboxes
Scale1/16
Out of stock
$1.80
15WAMP
NEW 15w Sound Booster amplifier for the TK35 and TK22 boards. Includes DC regulator Some basic electrical knowledge and skill is required for installation. Clark's connection diagram is visible below, or for further information, you can visit the TK22 Information Page Please note:...
In Stock
$38.00
+
TAG120603
This is the cable used for infrared battling. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is mainly used for replacements or Airsoft to Infrared...
Scale1/16
In Stock
$7.00
+
TK-EC023
2 Pin JST Connector Red And Black Wire - thin style - great for speakers, smoke units, lights etc. Suitable for Heng Long, Taigen, Torro, Waltersons 1/16 RC tanks. Includes: 1 x 2 Pin Connector Red And Black Thin Wire Specs: 2.5mm Pitch 5.7mm Plug Width 30cm Length  
Scale1/16
Out of stock
$1.70
TK-EC025
3 Pin - 3 Pin bridge cable for connecting receiver board to RX18. Please note: Colour may vary
Scale1/16
In Stock
$2.00
+
CLARKIRPL
This item is for changing the setting on your TK20/TK22 board. By default, ALL TK22 series boards are set to the 'Heavy Tank' setting. If you have a TAMIYA battle unit(TBU), or a Heng-Leog battle unit(HBU), you do not need this programming line. Only users with no IR battle need this for...
Out of stock
$10.00
10AFUSE
Replacement 10 amp fuse for ThinkTank Tank Module ECO/PRO. Requirements ThinkTank Tank Module PRO ThinkTank Tank Module ECO   Includes: 1 x 10A fuse
In Stock
$2.00
+
IRU002
 TEMPORARILY UNAVAILABLE
In Stock
Contact for Availability
Mato High Quality full range speaker for RC Tanks
Save 25%
MF3019-U
35mm full range speaker for your 1/16 RC Tank
Scale1/16
In Stock
$16.00 $12.00
You save: $4.00
+
Save 29%
TAM9785086
Tamiya 1/16 Tiger I Speaker with enclosure
In Stock
$69.95 $49.95
You save: $20.00
+
TK-EC009w
Replacement ON/OFF switch for your Heng Long or Taigen smoke unit. Please note: Some soldering may be required
Scale1/16
In Stock
$3.00
+
TKRESISTOR
Resistors for Clark TK22 Control Board - Set Of 3
In Stock
$2.50
+
HLTKv6Smoker
Smoker Unit For TK6.0s & TK6.1s Version MFU
In Stock
$14.00
+
TK-EC020
8-Pin and 2-Pin Plus 5-Pin Connector With Wire
Scale1/16
In Stock
$2.50
+
CLKREMOTE
Programming Remote For Clark TK Series IR Configuration Use this remote to program and change the settings on your Clark TK22 series control board. To be used in conjunction with the IR Programming Line For a complete list of settings visit:...
Out of stock
$14.00
TK-EC021
Replacement battery cable with Tamiya style plug for your Heng Long 1:16 scale radio controlled tank. Please note: Some soldering skill required for installation.
In Stock
$3.50
+
TAG120602
Replacment On/Off switch set for your Heng Long or Taigen RC Tank. Includes: On/Off Switch 2pin cable w/connector 2pin cable with Tamiya Plug  Please note: NOT compatible with the Heng Long TK6.0/6.1 MFU electrics
Scale1/16
In Stock
$6.00
+
TAMEXTPLUG
  DISCONTINUED
In Stock
Contact for Availability
TAG120600
Replacement main power cable for Heng Long, Taigen or Torro 1/16 RC tanks. This particular version has an extra ground cord (yes the cord is red), that connects to a Taigen infrared/recoil firing unit. This power cable is also compatible with non-IR tanks as well, simply tape off the extra...
In Stock
$6.00
+
TAMPLGSET
Replacement tamiya style battery plugs.
Scale1/16
In Stock
$2.00
+
40mm x 40mm Cooling Fan 2 Pin for TK6.0/s TK6.1/s And TK7.0 MFU
Save 25%
HLSP020
5v cooling fan for your Heng Long TK6.0/s, TK6.1/s, and TK7.0. Includes 2 Pin connector for use with CN2 port on your Heng Long 6 series and 7 series MFU Features: Color: black Noise level: 28 dB Fan dimension: 40 x 40 x 10 mm Fan life expectance:...
Scale1/16
In Stock
$8.00 $6.00
You save: $2.00
+
ZIPTIE10
Tidy up the wiring inside your tank with these cable zip ties. Includes: 10 x Cable Zip Tie - Size: 98mm x 2.5mm (Natural Colour)
In Stock
$0.50
+
SERVEXT42
High quality 420mm servo extension cord with strong, and well crimped JR Futaba Style connectors  
In Stock
$4.00
+
ZIPTIE10-B
Tidy up the wiring inside your tank with these cable zip ties. Includes: 10 x Cable Zip Tie - Size: 98mm x 2.5mm (Colour = Black)
In Stock
$0.50
+
TK-EC013C
Heng Long Replacement 8 pin connector Type B 1 x 8 pin port 2 x 3 pin port 1 x 2 pin port  
In Stock
Contact for Availability
Heng Long 8 Pin Turret Connector v4
Save 38%
HL3938-003
Turret connector for Heng Long v5.3 MFU equipped tanks
In Stock
$4.00 $2.50
You save: $1.50
+
HL6PCB
Brand new replacement 6 point bridge PCB for 1/16 Heng Long and Taigen RC Tanks.
In Stock
$1.50
+
HLDuPont
2-pin DuPont-style connectors for LED1-LED8 ports on TK6.0/6.1
In Stock
$0.70
+
TK-EC008
Power On/Off switch for your Heng Long 1:16 scale radio controlled tank
In Stock
$2.50
+
Product filters Product filters