Accessories

Updated air filter hoses for the 1/16 Tiger 1 Early Version tanks. These replacement air hoses replace the stock hoses on the tank and are much more realistic. The new hoses are textured and weaved versus the old smooth hard rubber. Please note: The hoses do not come with the end caps so...
$8.00
In Stock
+
1/16 scale American style tank commander with binoculars - Factory Painted. This is a half figure and will sit in most cupolas. Includes: 1 x Tank Commander Figure 1 x Binoculars 1 x Square of double sided tape
$6.00
Out of stock
$9.90 $7.90
You save: $2.00
In Stock
+
This high quality 3D resin printed spare road wheel in 1/16 scale is ideal for the turret mounted spare on your M1A1 Abrams tank. Includes: 1 x Spare Resin Road Wheel
$5.00
In Stock
+
Highly detailed German tank commander with headphones and pistol in 1/16 scale. Figure is approximately 70mm tall. Ideal for Panzer III and Panzer IV cupolas.  Includes : 1 x Tank Commander Figure   Depending on supply - resin colour may vary
$17.90
Out of stock
Hell Hath No Fury Like An Easy Eight Scorned Markings for a specific "Easy Eight", two versions of the names provided. And two sets of bumper codes and VRN provided, one in weathered appearance, the other unweathered. Also comes with colourful unit patches. Includes: 1 x Fury...
$14.00
In Stock
+
A very large set of decals covering well-known sandbagged M4s on the ETO, practised particularly by the 14th AD.   A number of the sandbagged M4s were of the long-gun variety, mostly M4A3E8 "Easy-eights" and M4A3 (76) W. While a number were void of markings other than the stars...
$24.00
In Stock
+
This set covers markings of four 4. Pz.Div. Panzer III Ausf. Js. White bear for 1st company, Red for 2nd and Yellow for 3rd, and Green for Stab (HQ). Includes: 2 x Waterslide Decal Sheet 1 x Information Sheet
$19.50
In Stock
+
A large marking set that covers 2nd & 3rd SS StuG III G's. Das Reich StuG's operated at Kursk with one late mark that served on the western front. A number of their StuG's displayed card symbols in front and back of each vehicle. Each symbol probably represent battery designations....
$23.90
In Stock
+
Ideal for tying down stowage or placing as unused rope on your 1/16 scale tank or vehicle. Includes: 1 x Length of Beige coloured unpainted rope (approx. 1 metre in length)   Colour may vary slightly from images
$3.00
In Stock
+
These high quality scale chains are suitable for allied or axis tanks, vehicles or scale diorama. Note: Colour may vary from picture slightly Includes: 1 x length of small gauge chain: Approx 30cm in Length Chain link dimensions = 3 mm x 2 mm x 0.5 mm
$3.00
In Stock
+
$10.00
In Stock
+
$8.50
In Stock
+
Now Comes in 1 Metre Length These chains are suitable for allied or axis tanks, vehicles or scale diorama. Includes: 1 x length of chain: Approx 1m in Length Chain link dimensions = 7 mm x 4 mm x 1 mm  
$6.90
In Stock
+
$12.00
Out of stock
Authentically detailed 1/16 scale Modern Australian Army Five Man Combat Ration Packs. Includes: 4 x CR5M boxes (menu A,B,C,D) supplied on single cardboard sheet Here is a great read on the CR5M ration packs including the menus (opens in new browser window).   Australian CR5M |...
$6.00
In Stock
+
Now available in 1/35 scale. Authentically detailed 1/35 scale Modern Australian Army Five Man Combat Ration Packs. Includes: 15 x CR5M boxes (3 x each menu A,B,C,D and E) supplied on single card Here is a great read on the CR5M ration packs including the menus (opens in new browser...
$6.00
In Stock
+
Fits all models of 1/16th scale tanks from Taigen, Tamiya, Heng Long, etc. This muzzle cover slides over the muzzle and also has an elastic cloth retaining band to hold the cover on the barrel and muzzle. Includes: 1 x Muzzle Break Cover 
$9.00
In Stock
+
Fits all models of 1/16th scale tanks from Taigen, Tamiya, Heng Long, etc. This muzzle cover slides over the muzzle and also has an elastic cloth retaining band to hold the cover on the barrel and muzzle. Includes: 1 x Muzzle Break Cover 
$9.00
In Stock
+
Single-sided 1/16 Scale German Balkenkreuz WWII Vehicle Aerial Recognition Flag.  Printed in Australia on High Quality 100% (200 Count - Made In Japan) Cotton Ideal for 1/16 scale early World War II era Includes: 1 x Flag (Single-sided)     This product...
$6.00
In Stock
+
Single-sided 1/16 Scale American (48 star) Vehicle Aerial Recognition Flag.  Printed in Australia on High Quality 100% (200 Count - Made In Japan) Cotton Ideal for all 1/16 scale World War II era Includes: 1 x Flag (Single-sided)     This product represents a...
$6.00
Out of stock
$24.90 $19.90
You save: $5.00
In Stock
+
$24.90 $19.90
You save: $5.00
In Stock
+
Wooden Ammunition crate in 1/16 scale. Great for adding a little extra detail to your rc tank, model or diorama. Includes: 1 x Ammunition crate  
$9.00
Out of stock
$24.90 $19.90
You save: $5.00
In Stock
+
Set of flexible vinyl sheets simulating zimmerit, a non-magnetic paste which was applied to panzers from 1943 to late 1944 as a measure against magnetic mines. Would suit Taigen, Torro, Heng Long, or Tamiya 1/16 scale RC tanks. The sheets are pre-coloured light-grey and cut to fit...
$14.00
Out of stock
$14.90 $12.90
You save: $2.00
Out of stock
$14.90 $12.90
You save: $2.00
Out of stock
$14.90 $12.90
You save: $2.00
In Stock
+
Add some character to your 1:16 scale Tamiya, Taigen, Torro or Heng long RC tank or diorama with this resin American soldier/tank rider World War II figure. Figures are pre-painted Includes: 1 x American Soldier Figure (tank not included)  
$25.00
Out of stock
This massive waterslide decal sheet provides a range of markings that can be used to represent the Leopard AS1 in service with the Australian Army (ADF) from 1977 until 2007. This sheet features white and red squadron signs, white chevrons, Leopard heads, transportation markings, several...
$29.90 $26.90
You save: $3.00
In Stock
+
Add some character to your 1:16 scale Tamiya, Taigen, Torro or Heng long RC tank or diorama with this resin American soldier/tank rider World War II figure. Figures are pre-painted Includes: 1 x American Soldier Figure (tank not included)  
$25.00
Out of stock
The Australian Army has used / uses a range of interesting camouflage patterns for its M1A1 MBTs. This 1/16 scale decal set allows you to model one of the more intriguing camo schemes. Pictured here applied to a tank from B Squadron of the 1st Armoured Regiment during the Warfighter Series in...
$29.90 $24.90
You save: $5.00
In Stock
+
Painted 1/16 WWII US Tank Commander (Half Body) for your 1/16 scale Mato, Heng Long, Taigen or Tamiya RC Tank. Suits: M4 Sherman M26 Pershing Inlcudes: 1 x Half Body Tank Commander Figure  
$24.00
Out of stock
A large assortment of 1/35 scale German WWII era armour numbers in different styles and sizes. Includes: 1 x Large Waterslide Decal Sheet (approx 210mm x 210mm)
$24.90 $22.90
You save: $2.00
In Stock
+
This sheet provides markings for ASLAV PCs from 2nd Cavalry Regiment and 2/14th Queensland Mounted rifles. Vehicle names include: CEREBRAL - (Timor) HAMMER TIME - (Iraq) BOLLOCKS BETTA THAN A...... CIRCLE WORK - (Iraq) Includes: 1 x Waterslide Decal...
$14.90
In Stock
+
1/16 scale German Tank Commander with headphones - Factory Painted. This is a half figure and will sit in most cupolas. Includes: 1 x Tank Commander Figure 1 x Headphones 1 x Square of double sided tape
$6.00
In Stock
+
This sheet provides generic markings for Australian (ADF) themed ASLAV PCs. Includes: 1 x Waterslide Decal Sheet
$14.90
In Stock
+
Now available separately are these Replacement German tank crew figures from the Stug III accessory set. Great for adding some character to your 1/16 scale German RC Tank Includes: 2 x Tank Crew Figure 1 x Dog Figure Please Note: Barrel NOT included
$7.00
In Stock
+
Add some detail to your Heng Long, or Taigen 1/16 Panzer III with this photo etch grill/mesh screen set. Includes: 1 x photo etched sheet
$14.00
In Stock
+
Panzer Regiment "HG" Panther Ausf G Interesting scheme coupled with interesting markings, a Centaur to be exact. What better way to "dress-up" your awesome large scale model! Generic Panther stencilings and vehicle registration included.  
$11.00
In Stock
+
A full generic alphanumerics for s.Pz.Jg.Abt.512 Jagdtigers, thus opening up a lot of options for other possibilities if you do not wish to model after the usual suspects. The styles derived from "X2" for a more accurate representation of the digits used by the unit. The ends of "X" and "Y"...
$15.50
In Stock
+
Add some detail to your 1/16 scale Heng Long, Taigen, or Tamiya Tiger I RC Tank or model with this Photo Etched Grill/mesh screen set. Includes: 1 x photo etch sheet  
$12.00
Out of stock
Only Show Instock
By Tank/Vehicle
By Scale
By Brand