Parts & Upgrades

Add some character to your 1/16 Heng Long , Tamiya, T aigen or Torro Tiger I A set of four metal tow hooks. Suitable for: Tiger 1 King Tiger, Panther G Jagdpanther Some tanks may require you to drill out the hole a bit for a proper fit. Includes: 4 x Metal Tow Shackle...
$6.00
In Stock
+
One bottle of quality smoke fluid for your Heng Long, Taigen or Torro RC tanks. Includes eyedropper style tip for easy application. Add just 3 drops for approx. 2 hours of runtime - do not overfill your smoker unit. Includes: 20ml bottle of Smoke Fluid Important Safety...
$6.00
In Stock
+
Mato Metal 1/16 - 5 Gallon Jerry Can German style ( Einheitskanister) . Great little accessory for adding detail to your Mato, Heng Long, Taigen or Tamiya 1/16 German RC tank
$3.00
In Stock
+
Well detailed metal ( MG 34 Panzerlauf style ) machine gun with LED light embedded in it. Fits Taigen/Torro 1/16 Tiger I RC tank. Will also fit Heng Long and Tamiya 1/16 Tiger I with some modification. Requires 4mm hole. Note: This item does not come with a plug and will need to be...
$8.00
In Stock
+
Mato Metal 1/16 German M1942 Helmets Ideal as an accessory to any WWII Era German Tank Includes: Metal 1/16 German M1942 Helmet x 2 (1 pair)    
$5.00
In Stock
+
Add some character to your 1/16 scale Heng Long, Taigen or Tamiya tank with this metal bucket from Mato toys. Includes: 1 x Metal Bucket
$4.00
In Stock
+
Upgrade your Heng Long 1/16 Tiger I RC Tank with these smooth rolling metal idler wheels with bearings. Includes: 2 x metal idler wheels with bearings   
$8.00
In Stock
+
Replacement smoke generator unit for your Heng Long 1/16 TK6.0s or TK6.1s or TK7.0 or TK7.1 equipped RC tank. Also compatible with ElMod FUSION ECO/PRO (Rev. F only) boards.   will NOT work with Heng Long v5.3 MFU or older. Includes: 1 x Smoke Unit (fluid tank may vary in colour) 2...
$14.00
In Stock
+
Upgrade your 1/16 scale Tiger I RC Tank now with this metal hull machine gun with metal base and LED light. Suits Heng Long, Taigen, Torro, Tamiya. Includes: 1 x Tiger I Metal Hull MG With Base And LED
$9.00
In Stock
+
Updated air filter hoses for the 1/16 Tiger 1 Early Version tanks. These replacement air hoses replace the stock hoses on the tank and are much more realistic. The new hoses are textured and weaved versus the old smooth hard rubber. Please note: The hoses do not come with the end caps so...
$8.00
In Stock
+
Replacement turret rotation/traverse motor unit for your 1/16 Heng Long RC Tanks For use with v5.3 and newer TK6 series Includes: 1 x rotation/traverse unit with cable and plug  
$9.00
In Stock
+
Replace the plastic rear mud guards (flaps) on you 1/16 scale Heng Long German Tiger I with these metal mud guards from Mato . Includes: 2 x Metal Mud guards 2 x Hinge supports  
$8.00
In Stock
+
Use Tamiya Cera Grease to provide lubrication to your newly installed steel, metal or plastic gearbox in your radio controlled tank, to help prevent premature wear and tear. As packaged inside the Tamiya 1/16 Scale RC Tank range, this Cera Grease HG is made using Boron Nitride which gives it...
$14.95 $12.90
You save: $2.05
In Stock
+
These steel gearboxes provide extended durability not only over the plastic gears but also over the traditional Heng Long cast/zinc alloy metal gearboxes. Please note: This gearbox will fit: Panzer III StuG III Panzer IV Tiger I Connector Type: 6.0/7.0 (bullet style)...
$49.90
Out of stock
Replacement BB motor unit for your 1/16 scale TK6 series or TK7.0 or TK7.1 Heng Long RC tank. Includes: 1 x BB Firing Motor unit with 2pin trigger (CN6) and 2pin motor wires (CN10)
$15.00
In Stock
+
Metal headlight with LED set for your Heng Long or Taigen 1/16 scale Tiger I RC Tank from MATO. Includes 2 x Metal Headlight 2 x LED with wires (wire colour may vary from image)
$8.00
In Stock
+
A set (pair) of copper stranded tow cables for the Heng Long or Taigen 1/16 Tiger I RC tanks. Would also suit King Tiger. Approx. 53cm in length Includes: Metal Tow Cable x 2 (1 pair)
$12.90
In Stock
+
Add some great detail to your Heng Long or Taigen 1/16 scale Panzer III or StuG III with this metal cupola MG34. Includes: 1 x Panzer III cupola metal machine gun (7.92 mm MG34 style).  
$6.00
In Stock
+
Metal engine and transmission covers for the 1/16 Heng Long and Taigen Tiger I RC Tanks. Includes: 1 x Engine Air Intake Cover for Mid & Late Production 2 x Transmission Covers (left/right)
$6.00
In Stock
+
Description: Upgrade your Tiger I plastic drive sprockets with this durable metal set from Mato Toys. It is suitable for the 1/16 Heng Long German Tiger Tank (3818) and the German Panther Tank ('PanTiger' 3819). For use with original plastic tracks and Mato brand metal tracks. Includes: 2...
$12.00
In Stock
+
Only Show Instock
By Tank/Vehicle
By Scale
By Brand