Bestsellers

These metal a ir hose clamps  are a replacement for yout 1/16 scale Heng Long or Mato Tiger I RC Tank .
$4.50
In Stock
+
Ideal for a late model conversion of your Heng Long 1/16 Tiger I RC Tank. The kit features: Metal Tracks Spare Track Links And Pins Track colour:   Black I t is recommended that when running metal tracks you have the metal drive sprockets and idlers fitted as well...
$70.00
Out of stock
Metal 'C' hooks for the rear panel of your 1/16 scale Heng Long or Mato RC Tank. Includes: 2 x Metal 'C' Hook
$9.00
In Stock
+
Metal tow cable with buckles for the righthand side upper hull section of your 1/16 scale King Tiger RC tank. Includes: 1 x tow cable 8 x buckles
$9.00
In Stock
+
A set (pair) of metal tow cables for your 1/16 scale Heng Long or Mato StuG III RC tank. Includes: 2 x metal tow cables 2 x Buckles with screws
$12.00
In Stock
+
A large marking set that covers 2nd & 3rd SS StuG III G's. Das Reich StuG's operated at Kursk with one late mark that served on the western front. A number of their StuG's displayed card symbols in front and back of each vehicle. Each symbol probably represent battery designations....
$23.90
In Stock
+
Hell Hath No Fury Like An Easy Eight Scorned Markings for a specific "Easy Eight", two versions of the names provided. And two sets of bumper codes and VRN provided, one in weathered appearance, the other unweathered. Also comes with colourful unit patches. Includes: 1 x Fury...
$14.00
In Stock
+
Highly detailed German tank commander with headphones and pistol in 1/16 scale. Figure is approximately 70mm tall. Ideal for Panzer III and Panzer IV cupolas.  Includes : 1 x Tank Commander Figure   Depending on supply - resin colour may vary
$17.90
In Stock
+
This high quality 3D resin printed spare road wheel in 1/16 scale is ideal for the turret mounted spare on your M1A1 Abrams tank. Includes: 1 x Spare Resin Road Wheel
$5.00
In Stock
+
$9.90 $7.90
You save: $2.00
In Stock
+
Metal MG shield for your Heng Long 1/16 German StuG III RC Tank. Includes: 1 x Metal MG Shield 1 x Mounting Hardware
$7.00
In Stock
+
This XT60 Male To Deans T Plug Female Adapter allows you to connect your XT60 battery pack to your TK6.1/s and TK7.1 Multifunction Board. Includes: 1 x XT60 Male To Deans T Plug Female Adapter
$4.00
In Stock
+
This XT60 male to bullet connector cable allows you to use a battery pack with the XT60 connector on your TK6.0s and TK7.0 multifunction board. Compatible with: TK6.0s TK7.0  Not compatible with TK6.1/s or Tk7.1 boards.
$5.50
In Stock
+
These quality lanyards are made from Polyester and include a metal 'lobster claw' style clip for quick attachment/release. Includes: 1 x Polyester Lanyard Colour: BLACK Also available in Royal Blue
$9.95 $5.95
You save: $4.00
In Stock
+
Replacement TK7.1 Multifunction Unit (MFU) for your Heng Long 1/16 RC Tank. TK7.1 Features: Servo support for barrel elevation and barrel recoil Servo support for 360 degree periscope Servo signal support for warning/flashing lights mode Elevation & Recoil servo reverse...
$120.00
In Stock
+
Metal front mud guard (flaps) set for your Heng Long or Mato 1/16 King Tiger RC Tank. Includes: 1 x Front Mud guard Pair (Left and right) Mounting hardware Please note: Some modification may be needed to your Heng Long King Tiger for fitment of this item.
$19.00
In Stock
+
3 Pin DuPont Style Cable for TK6.1/s And TK7.1 multifunction boards. For use with the CH1 to CH6 and CH13/CH16 Includes: 1 x 3pin DuPont Connector with cable
$3.00
In Stock
+
Our custom brushes are made with high quality synthetic fibres and feature a special tri-grip that feels comfortable in the hand no matter which way it is held. CONTAINS 5 BRUSH SIZES 5/0 3/0 2/0 0 1
$20.00
In Stock
+
Replacement 2-pin DuPont-style connector with red/white cable for LED 5 port (Machine Gun) on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Includes: 1 x 2pin DuPont-style connector with red/white cable
$3.00
In Stock
+
Heng Long IR Receiver Connector With cable for the 6 series and newer MFUs.  Suitable for the following Heng Long Multifunction boards: TK7.0 Includes: 3pin Plug with cabe and connector for TK7.0 Multifunction Boards
$5.00
In Stock
+
Replacment battery cable with Tamiya plug for your Heng Long 1/16 scale RC Tank. Compatible with TK 6.0/s series and TK 7.0 series multifunction boards. Includes: 1 x battery cable with Tamiya plug
$4.00
In Stock
+
Replacment On/Off switch for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Includes: On/Off Switch 2pin connector with cable
$4.00
In Stock
+
Replacment IR Emitter with cable for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards.  Includes: 1 x IR Emitter
$4.00
In Stock
+
Replacement 2-pin DuPont-style connector with cable for LED1 to LED8 ports on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Compatible with: TK6.0 | TK6.0S | TK6.1 | TK6.1S TK7.0 | TK7.1 Includes: 2 x 2pin DuPont-style...
$5.00
In Stock
+
Replacment gearbox cables for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Comptible with: TK6.0 | TK6.0s | TK6.1 | TK6.1s TK7.0 | TK7.1 Includes: 2 x Red and Black gearbox cable pairs (for one gearbox)
$5.00
In Stock
+
A set of striking unit markings from StuG Brigade 667. Emblem artwork is based on actual StuGs in combat. These markings were seen on their StuG Ausf. F & Gs that operated on the Eastern and Western fronts. As the saying goes "the devil is in the details". While the markings are straight...
$20.00
In Stock
+
A very large set of decals covering probably the final batches of Panzer IIIs shipped to DAKs in Afrka. Ranging from Ausf Js to Ns. The tactical markings of this unit is unique, using large card symbols and rings to signify different Kompanies and Platoons. They appear on both turret sides...
$28.00
In Stock
+
Replacement metal track link for your 1/16 scale Taigen Tiger I RC Tank Mid/Late version. Includes: 1 x METAL Track Link 2 x track pins
$1.00
In Stock
+
Now available in 1/35 scale. Authentically detailed 1/35 scale Modern Australian Army Five Man Combat Ration Packs. Includes: 15 x CR5M boxes (3 x each menu A,B,C,D and E) supplied on single card Here is a great read on the CR5M ration packs including the menus (opens in new browser...
$6.00
In Stock
+
Metal MG34 With Cupola mount for the Taigen 1/16 Tiger I RC Tank (Mid/Late Version). Designed to fit the late style commanders cupola. Includes: 1 x MG34 (metal) 1 x cupola ring mount (metal)
$7.90
In Stock
+
Replacement plastic lifting jack for your 1/16 scale Taigen Tiger I RC Tank (Mid/Late). Includes: 1 x Plastic lifting jack
$4.00
In Stock
+
Replacement plastic bucket for your 1/16 scale rc tank. Includes: 1 x plastic bucket
$3.00
In Stock
+
Fits all models of 1/16th scale tanks from Taigen, Tamiya, Heng Long, etc. This muzzle cover slides over the muzzle and also has an elastic cloth retaining band to hold the cover on the barrel and muzzle. Includes: 1 x Muzzle Break Cover 
$9.00
In Stock
+
Fits all models of 1/16th scale tanks from Taigen, Tamiya, Heng Long, etc. This muzzle cover slides over the muzzle and also has an elastic cloth retaining band to hold the cover on the barrel and muzzle. Includes: 1 x Muzzle Break Cover 
$9.00
In Stock
+
1/16 scale American style tank commander with binoculars - Factory Painted. This is a half figure and will sit in most cupolas. Includes: 1 x Tank Commander Figure 1 x Binoculars 1 x Square of double sided tape
$6.00
Out of stock
Replacement pair of plastic rear mud guards (flaps) for the Taigen 1/16 Tiger I RC tank. May also fit Heng Long and Torro Tiger I tanks. Includes: 1 x mud guard (left) 1 x mud guard (right)
$4.00
In Stock
+
The book has 305 pages with over 1,000 images. An excellent reference book on Australian M113 and M113A1 APCs and variants used between 1972 and 2013 It presents walkarounds of the M113A1 T50 turreted APC, T50 turret, M125A1 81mm mortar car, M577A1 command vehicle, M806A1 Armoured...
$55.00 $49.90
You save: $5.10
Out of stock
2m long Braided Airhose designed to work with SMS DragonAir Airbrushes and any other airbrushes that use a 1/8th fitting.
$14.90
In Stock
+
High quality Inline Filter & Moisture Trap with built in Air Regulator control suitable for all airbrushes.  Attach between the airbrush and the air hose to help prevent water and dust from entering into the airbrush. Simply unscrew the main body in half to clean the filter. 
$34.90
In Stock
+
The DragonAir line of professional airbrushes are designed with the modeller in mind. The forged aluminium body and stainless steel nozzle and needle are perfectly weighted for smooth operation.  Features :  Forged Aluminium body with anodized colour to match nozzle size...
$124.90
Out of stock
  ROAD TRANSPORT ONLY This product is classified as dangerous goods. Due to aviation safety laws, it cannot be sent Express or airmail .
$7.95
In Stock
+
  ROAD TRANSPORT ONLY This product is classified as dangerous goods. Due to aviation safety laws, it cannot be sent Express or airmail .
$40.00 $36.00
You save: $4.00
In Stock
+
Keep your favorite canned or bottled beverage chilled with this OzArmour themed stubby/can cooler. Includes: 1 x Stubby cooler (ideal for stubbies - will also just fit can - can not included )  
$7.00
In Stock
+
Metal Rear Lights (with LED's) and protective guards for the 1/16 Mato M4 Sherman RC Tank. Includes: 2 x Rear Light w/LED and cables (1 pair) 2 x Metal guard (1 pair) Some modification may be required to fit the Heng Long M4 Sherman RC Tank
$13.90
In Stock
+
This sheet provides generic markings for Australian (ADF) themed ASLAV PCs. Includes: 1 x Waterslide Decal Sheet
$14.90
In Stock
+
This sheet provides markings for ASLAV PCs from 2nd Cavalry Regiment and 2/14th Queensland Mounted rifles. Vehicle names include: CEREBRAL - (Timor) HAMMER TIME - (Iraq) BOLLOCKS BETTA THAN A...... CIRCLE WORK - (Iraq) Includes: 1 x Waterslide Decal...
$14.90
In Stock
+
$8.50
In Stock
+
$10.00
In Stock
+