Bestsellers

Metal turret side pistol port for Heng Long 1/16 RC German Tiger 1 tank 3818. Includes: 1 x Turret Metal Pistol Port
$5.00
In Stock
+
Metal idler wheel set for your Heng Long 1/16 Panther G (3879) or Jagdpanther (3869) RC tank. Includes: 2 x Metal Idler Wheels 2 x Idler wheel screws    
$8.00
In Stock
+
Replacement drive sprocket hex screws for your Heng Long 1/16 RC Tank. Compatible with most Heng Long 1/16 scale RC tank drive sprockets. Includes: 2 x Hex drive sprocket screw
$2.50
In Stock
+
Metal Drive Sprocket Set For Heng Long 1/16 Panther G RC Tank (3879). Includes: 2 x Drive Sprocket 2 x Cap 2 x Screws with washers
$12.00
Out of stock
  ROAD TRANSPORT ONLY This product is classified as dangerous goods. Due to aviation safety laws, it cannot be sent Express or airmail .
$9.95 $8.95
You save: $1.00
In Stock
+
Add some detail to your Heng Long, or Taigen 1/16 Panzer III with this photo etch grill/mesh screen set. Includes: 1 x photo etched sheet
$14.00
In Stock
+
Replacment On/Off switch set for your Heng Long or Taigen RC Tank. Includes: On/Off Switch 2pin cable w/connector 2pin cable with Tamiya Plug  Please note: NOT compatible with the Heng Long TK6.0/6.1 MFU electrics
$6.00
In Stock
+
Replacement main power cable for Heng Long, Taigen or Torro 1/16 RC tanks. This particular version has an extra ground cord (yes the cord is red), that connects to a Taigen infrared/recoil firing unit. This power cable is also compatible with non-IR tanks as well, simply tape off the extra...
$6.00
In Stock
+
Panzer Regiment "HG" Panther Ausf G Interesting scheme coupled with interesting markings, a Centaur to be exact. What better way to "dress-up" your awesome large scale model! Generic Panther stencilings and vehicle registration included.  
$11.00
In Stock
+
Keep your favorite canned or bottled beverage chilled with this Bundeswehr themed foldable stubby/can cooler. Includes: 1 x Stubby/Can cooler (can not included )  
$7.00
In Stock
+
  ROAD TRANSPORT ONLY This product is classified as dangerous goods. Due to aviation safety laws, it cannot be sent Express or airmail .
$9.95 $8.95
You save: $1.00
In Stock
+
Keep your favorite canned or bottled beverage chilled with this OzArmour themed stubby/can cooler. Includes: 1 x Stubby cooler (ideal for stubbies - will also just fit can - can not included )  
$7.00
In Stock
+
Replacment IR Emitter with cable for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards.  Includes: 1 x IR Emitter
$4.00
In Stock
+
Replacment On/Off switch for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Includes: On/Off Switch 2pin connector with cable
$4.00
In Stock
+
Replacment battery cable with Tamiya plug for your Heng Long 1/16 scale RC Tank. Compatible with TK 6.0/s series and TK 7.0 series multifunction boards. Includes: 1 x battery cable with Tamiya plug
$4.00
In Stock
+
Heng Long IR Receiver Connector With cable for the 6 series and newer MFUs.  Suitable for the following Heng Long Multifunction boards: TK7.0 Includes: 3pin Plug with cabe and connector for TK7.0 Multifunction Boards
$5.00
In Stock
+
A full generic alphanumerics for s.Pz.Jg.Abt.512 Jagdtigers, thus opening up a lot of options for other possibilities if you do not wish to model after the usual suspects. The styles derived from "X2" for a more accurate representation of the digits used by the unit. The ends of "X" and "Y"...
$15.50
In Stock
+
Replacment gearbox cables for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Comptible with: TK6.0 | TK6.0s | TK6.1 | TK6.1s TK7.0 | TK7.1 Includes: 2 x Red and Black gearbox cable pairs (for one gearbox)
$5.00
In Stock
+
Mato Metal Upper Hull MG for 1/16 Heng Long Panzer III
$5.00
In Stock
+
Add some detail to your 1/16 scale Heng Long, Taigen, or Tamiya Tiger I RC Tank or model with this Photo Etched Grill/mesh screen set. Includes: 1 x photo etch sheet  
$12.00
In Stock
+
This is the cable used for infrared battling. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is mainly used for replacements or Airsoft to Infrared...
$7.00 $5.00
You save: $2.00
In Stock
+
Replacement plastic drive sprocket pair for your 1:16 scale Heng Long M41 Walker Bulldog RC Tank Includes: 2 x Plastic Drive Sprocket  
$4.00
In Stock
+
Supersized markings to splash all over your 1/16 M1A2 Abrams. Ideal for the Tamiya, Heng Long M1A2 kits Let B troop "Bandit" Blitzkrieg the heck of out of your 1/16 M1A2  
$16.00
In Stock
+
Replacement 2-pin DuPont-style connector with cable for LED1 to LED8 ports on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Compatible with: TK6.0 | TK6.0S | TK6.1 | TK6.1S TK7.0 | TK7.1 Includes: 2 x 2pin DuPont-style...
$5.00
In Stock
+
Replacement 2-pin DuPont-style connector with red/white cable for LED 5 port (Machine Gun) on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Includes: 1 x 2pin DuPont-style connector with red/white cable
$3.00
In Stock
+
3 Pin DuPont Style Cable for TK6.1/s And TK7.1 multifunction boards. For use with the CH1 to CH6 and CH13/CH16 Includes: 1 x 3pin DuPont Connector with cable
$3.00
In Stock
+
3 Pin - 3 Pin bridge cable for connecting receiver board to RX18. Please note: Colour may vary
$2.00
In Stock
+
Photo Etched Grill/mesh screen set for 1/16 Heng Long, Taigen and Tamiya King Tiger rc tanks. Suits both Henschel and Porsche turret King Tiger rc tanks. Includes: 2 x photo etch grill sheets
$22.00
Out of stock
Mato Metal road wheel set that includes bearing's in the wheels for the Heng Long 1/16 T34 RC Tank   Please note:  For 6.0 version or newer. This kit no longer fits the plastic suspension arms found on previous version of the Heng Long T-34.
$66.00
Out of stock
Metal headlight with LED set for your Heng Long or Taigen 1/16 scale Tiger I RC Tank from MATO. Includes 2 x Metal Headlight 2 x LED with wires (wire colour may vary from image)
$8.00
In Stock
+
Add some detail to your 1/16 scale Heng Long or Taigen T-34/85 with this Photo Etched anti mine mesh/grill set. Includes: 1 x Photo Etched Mesh Grill  
$12.00
In Stock
+
Finely printed, down to the exact fonts seen on actual examples. Each label is carefully produced, more often with a combination of fonts (not just one singular type set) manually captured from real ones. At this level, one could make out some of the smaller text and appreciate the differences...
$9.00
In Stock
+