Heng Long/Taigen

Upgrade your 1/16 scale Heng Long or Taigen German RC Tank with this metal Notek night driving light with LED. Includes: 1 x NOTEK Light with LED (for German Panzer III, StuG III and Panzer IV RC tanks).   What is a 'NOTEK' light? This special 'blackout' headlight permitted...
$8.00
In Stock
+
Mato Metal headlight with LED and wires for the Heng Long or Taigen 1/16 Panzer III (3848) Includes: 2 x Metal headlight with LED - wire colours may vary from image 2 x Mount  
$8.00
In Stock
+
Metal headlight with LED set for your Heng Long or Taigen 1/16 scale Tiger I RC Tank from MATO. Includes 2 x Metal Headlight 2 x LED with wires (wire colour may vary from image)
$8.00
In Stock
+
Metal Hull machine Gun .30 cal Browning 1919 style MG with LED for the Heng Long and Mato 1/16 Sherman RC tank. Includes: .30 cal Browning 1919 style MG with LED and wire x 1  
$8.00
In Stock
+
Upgrade your 1/16 scale Tiger I RC Tank now with this metal hull machine gun with metal base and LED light. Suits Heng Long, Taigen, Torro, Tamiya. Includes: 1 x Tiger I Metal Hull MG With Base And LED
$9.00
In Stock
+
Replacement Standard 3mm LED Pair RED for RC Tank Rear Lights. Suit: Heng Long, Taigen, Torro and Tamiya. Includes: Standard 3mm Red Led x 2 Cables NOT included
$1.60
In Stock
+
5MM EMITTING DIODE with blue transparent lens. Suitable replacement for Clark IR010 diode. Features: Viewing Angle: 30° Peak Spectral Wavelength(IR): 940nm @ 20mA  Spectral Bandwidth (DI): 50nm@20mA
$2.80
In Stock
+
Replacement 5mm White emitting LED with clear lens. Suit Heng Long, Taigen, Torro and some Tamiya applications. Features: Viewing Angle: 30° Intensity: 4000mcd Typical Forward Voltage: 3.2VDC Typical Forward CUrrent: 20mA
$1.20
In Stock
+
Replacment On/Off switch set for your Heng Long or Taigen RC Tank. Includes: On/Off Switch 2pin cable w/connector 2pin cable with Tamiya Plug  Please note: NOT compatible with the Heng Long TK6.0/6.1 MFU electrics
$6.00
In Stock
+
Replacement main power cable for Heng Long, Taigen or Torro 1/16 RC tanks. This particular version has an extra ground cord (yes the cord is red), that connects to a Taigen infrared/recoil firing unit. This power cable is also compatible with non-IR tanks as well, simply tape off the extra...
$6.00
In Stock
+
Replacment IR Emitter with cable for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards.  Includes: 1 x IR Emitter
$4.00
In Stock
+
Replacment On/Off switch for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Includes: On/Off Switch 2pin connector with cable
$4.00
In Stock
+
Replacment battery cable with Tamiya plug for your Heng Long 1/16 scale RC Tank. Compatible with TK 6.0/s series and TK 7.0 series multifunction boards. Includes: 1 x battery cable with Tamiya plug
$4.00
In Stock
+
Heng Long IR Receiver Connector With cable for the 6 series and newer MFUs.  Suitable for the following Heng Long Multifunction boards: TK7.0 Includes: 3pin Plug with cabe and connector for TK7.0 Multifunction Boards
$5.00
In Stock
+
Replacment gearbox cables for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Comptible with: TK6.0 | TK6.0s | TK6.1 | TK6.1s TK7.0 | TK7.1 Includes: 2 x Red and Black gearbox cable pairs (for one gearbox)
$5.00
In Stock
+
This is the cable used for infrared battling. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is mainly used for replacements or Airsoft to Infrared...
$7.00 $5.00
You save: $2.00
In Stock
+
Replacement 2-pin DuPont-style connector with cable for LED1 to LED8 ports on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Compatible with: TK6.0 | TK6.0S | TK6.1 | TK6.1S TK7.0 | TK7.1 Includes: 2 x 2pin DuPont-style...
$5.00
In Stock
+
Replacement 2-pin DuPont-style connector with red/white cable for LED 5 port (Machine Gun) on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Includes: 1 x 2pin DuPont-style connector with red/white cable
$3.00
In Stock
+
3 Pin DuPont Style Cable for TK6.1/s And TK7.1 multifunction boards. For use with the CH1 to CH6 and CH13/CH16 Includes: 1 x 3pin DuPont Connector with cable
$3.00
In Stock
+
3 Pin - 3 Pin bridge cable for connecting receiver board to RX18. Please note: Colour may vary
$2.00
In Stock
+
8-Pin and 2-Pin Plus 5-Pin Connector With Wire for the Heng Long Multifunction unit (version 5.3 or older). Also compatible with the Taigen V1, V2 and V3 series MFU. Includes: 1 x 8pin to 5pin/2pin Cable 
$2.50 $1.90
You save: $0.60
In Stock
+
Replacement turret connector for your Heng Long 1/16 scale RC Tank v5.3 MFU 1 x 8 pin port 3 x 2 pin port 1 x 3 pin port
$4.00 $2.00
You save: $2.00
In Stock
+
$1.50 $1.00
You save: $0.50
In Stock
+
Replacement 2-pin DuPont-style connectors for LED1-LED8 ports on the Heng Long TK6.0/s, TK6.1/s and TK7.0 multifunction boards for RC Tanks. Includes: 1 x 2pin DuPont-style connector housing 2 x Female Crimp Pins
$0.70
In Stock
+
Electrical Category
Only Show Instock
By Tank/Vehicle
By Brand