Electrical

Tidy up the wiring inside your tank with these cable zip ties. Includes: 10 x Cable Zip Tie - Size: 98mm x 2.5mm (Natural Colour)
$0.50
In Stock
+
Tidy up the wiring inside your tank with these cable zip ties. Includes: 10 x Cable Zip Tie - Size: 98mm x 2.5mm (Colour = Black)
$0.50
In Stock
+
Replacement 2-pin DuPont-style connectors for LED1-LED8 ports on the Heng Long TK6.0/s, TK6.1/s and TK7.0 multifunction boards for RC Tanks. Includes: 1 x 2pin DuPont-style connector housing 2 x Female Crimp Pins
$0.70
In Stock
+
$1.50 $1.00
You save: $0.50
In Stock
+
Replacement 5mm White emitting LED with clear lens. Suit Heng Long, Taigen, Torro and some Tamiya applications. Features: Viewing Angle: 30° Intensity: 4000mcd Typical Forward Voltage: 3.2VDC Typical Forward CUrrent: 20mA
$1.20
In Stock
+
Three screws for mounting your TK board to base plate
$1.50
In Stock
+
Replacement Standard 3mm LED Pair RED for RC Tank Rear Lights. Suit: Heng Long, Taigen, Torro and Tamiya. Includes: Standard 3mm Red Led x 2 Cables NOT included
$1.60
In Stock
+
8-Pin and 2-Pin Plus 5-Pin Connector With Wire for the Heng Long Multifunction unit (version 5.3 or older). Also compatible with the Taigen V1, V2 and V3 series MFU. Includes: 1 x 8pin to 5pin/2pin Cable 
$2.50 $1.90
You save: $0.60
In Stock
+
3 Pin - 3 Pin bridge cable for connecting receiver board to RX18. Please note: Colour may vary
$2.00
In Stock
+
Replacement 10 amp fuse for ThinkTank Tank Module ECO/PRO. Requirements ThinkTank Tank Module PRO ThinkTank Tank Module ECO   Includes: 1 x 10A fuse
$2.00
In Stock
+
Replacement turret connector for your Heng Long 1/16 scale RC Tank v5.3 MFU 1 x 8 pin port 3 x 2 pin port 1 x 3 pin port
$4.00 $2.00
You save: $2.00
In Stock
+
Never be confused about which packs are fully charged again. These handy little charged/discharged coloured indicator caps are easily fitted to the XT60 battery connector. These caps also provide additional piece of mind by further reducing the chance an electrical short circuit whilst in...
$2.20
In Stock
+
Resistors for Clark TK22 Control Board - Set Of 3
$2.50
In Stock
+
5MM EMITTING DIODE with blue transparent lens. Suitable replacement for Clark IR010 diode. Features: Viewing Angle: 30° Peak Spectral Wavelength(IR): 940nm @ 20mA  Spectral Bandwidth (DI): 50nm@20mA
$2.80
In Stock
+
Replacement 2-pin DuPont-style connector with red/white cable for LED 5 port (Machine Gun) on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Includes: 1 x 2pin DuPont-style connector with red/white cable
$3.00
In Stock
+
3 Pin DuPont Style Cable for TK6.1/s And TK7.1 multifunction boards. For use with the CH1 to CH6 and CH13/CH16 Includes: 1 x 3pin DuPont Connector with cable
$3.00
In Stock
+
High quality 420mm servo extension cord with strong, and well crimped JR Futaba Style connectors  
$4.00
In Stock
+
Replacment IR Emitter with cable for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards.  Includes: 1 x IR Emitter
$4.00
In Stock
+
Replacment On/Off switch for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Includes: On/Off Switch 2pin connector with cable
$4.00
In Stock
+
Replacment battery cable with Tamiya plug for your Heng Long 1/16 scale RC Tank. Compatible with TK 6.0/s series and TK 7.0 series multifunction boards. Includes: 1 x battery cable with Tamiya plug
$4.00
In Stock
+
This XT60 Male To Deans T Plug Female Adapter allows you to connect your XT60 battery pack to your TK6.1/s and TK7.1 Multifunction Board. Includes: 1 x XT60 Male To Deans T Plug Female Adapter
$4.00
In Stock
+
This is the cable used for infrared battling. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is mainly used for replacements or Airsoft to Infrared...
$7.00 $5.00
You save: $2.00
In Stock
+
Replacment gearbox cables for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Comptible with: TK6.0 | TK6.0s | TK6.1 | TK6.1s TK7.0 | TK7.1 Includes: 2 x Red and Black gearbox cable pairs (for one gearbox)
$5.00
In Stock
+
Replacement 2-pin DuPont-style connector with cable for LED1 to LED8 ports on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Compatible with: TK6.0 | TK6.0S | TK6.1 | TK6.1S TK7.0 | TK7.1 Includes: 2 x 2pin DuPont-style...
$5.00
In Stock
+
Heng Long IR Receiver Connector With cable for the 6 series and newer MFUs.  Suitable for the following Heng Long Multifunction boards: TK7.0 Includes: 3pin Plug with cabe and connector for TK7.0 Multifunction Boards
$5.00
In Stock
+
This XT60 male to bullet connector cable allows you to use a battery pack with the XT60 connector on your TK6.0s and TK7.0 multifunction board. Compatible with: TK6.0s TK7.0  Not compatible with TK6.1/s or Tk7.1 boards.
$5.50
In Stock
+
Cooling fan for your Heng Long TK6.0/s, TK6.1/s, and TK7.0 series boards. Features: Color: black Noise level: 22 dB Fan dimension: 40 x 40 x 10 mm 2pin connector Rated Voltage: 12VDC,0.1A Fan Speed: 3000RPM(+/-10%)...
$8.00 $6.00
You save: $2.00
In Stock
+
Replacment On/Off switch set for your Heng Long or Taigen RC Tank. Includes: On/Off Switch 2pin cable w/connector 2pin cable with Tamiya Plug  Please note: NOT compatible with the Heng Long TK6.0/6.1 MFU electrics
$6.00
In Stock
+
Replacement main power cable for Heng Long, Taigen or Torro 1/16 RC tanks. This particular version has an extra ground cord (yes the cord is red), that connects to a Taigen infrared/recoil firing unit. This power cable is also compatible with non-IR tanks as well, simply tape off the extra...
$6.00
In Stock
+
Well detailed metal ( MG 34 Panzerlauf style ) machine gun with LED light embedded in it. Fits Taigen/Torro 1/16 Tiger I RC tank. Will also fit Heng Long and Tamiya 1/16 Tiger I with some modification. Requires 4mm hole. Note: This item does not come with a plug and will need to be...
$8.00
In Stock
+
Upgrade your 1/16 scale Heng Long or Taigen German RC Tank with this metal Notek night driving light with LED. Includes: 1 x NOTEK Light with LED (for German Panzer III, StuG III and Panzer IV RC tanks).   What is a 'NOTEK' light? This special 'blackout' headlight permitted...
$8.00
In Stock
+
Mato Metal headlight with LED and wires for the Heng Long or Taigen 1/16 Panzer III (3848) Includes: 2 x Metal headlight with LED - wire colours may vary from image 2 x Mount  
$8.00
In Stock
+
Electrical Category
Only Show Instock
By Tank/Vehicle
By Brand