0Cart

Electrical

Sort by:
Position: Low to High
Show:
12
Heng Long IR Receiver Connector With Wire For TK7.0 Multifunction Boards
Heng Long IR Receiver Connector With cable for the 6 series and newer MFUs.  Suitable for the following Heng Long Multifunction boards: TK7.0 Includes: 3pin Plug with cabe and connector for TK7.0 Multifunction Boards
$5.00
In Stock
+ −
Heng Long Gearbox Cables For TK6 And TK7 Series Multifunction Boards
Heng Long
Replacment gearbox cables for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Comptible with: TK6.0 | TK6.0s | TK6.1 | TK6.1s TK7.0 | TK7.1 Includes: 2 x Red and Black gearbox cable pairs (for one gearbox)
$5.00
In Stock
+ −
Genuine Taigen IR Emitter & IR Receiver Cable
This is the cable used for infrared battling. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is mainly used for replacements or Airsoft to Infrared...
$7.00 $5.00
You save: $2.00
In Stock
+ −
Heng Long 2 Pin DuPont-Style Connector With Wires For TK6.0/TK6.1/TK7.0/TK7.1 MFU
Heng Long
Replacement 2-pin DuPont-style connector with cable for LED1 to LED8 ports on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Compatible with: TK6.0 | TK6.0S | TK6.1 | TK6.1S TK7.0 | TK7.1 Includes: 2 x 2pin DuPont-style...
$5.00
In Stock
+ −
Heng Long 2Pin DuPont-Style Red/White Cable For TK6.0 TK6.1 TK7.0 TK7.1 MFU
Replacement 2-pin DuPont-style connector with red/white cable for LED 5 port (Machine Gun) on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Includes: 1 x 2pin DuPont-style connector with red/white cable
$3.00
In Stock
+ −
Heng Long 3 Pin DuPont Style Cable for TK6.1/s And TK7.1 MFU
3 Pin DuPont Style Cable for TK6.1/s And TK7.1 multifunction boards. For use with the CH1 to CH6 and CH13/CH16 Includes: 1 x 3pin DuPont Connector with cable
$3.00
In Stock
+ −
Heng Long 3 Pin to 3 Pin Bridge Cable
3 Pin - 3 Pin bridge cable for connecting receiver board to RX18. Please note: Colour may vary
$2.00
In Stock
+ −
Resistors for Clark TK22 Control Board - Set Of 3
Clark Model
Resistors for Clark TK22 Control Board - Set Of 3
$2.50
In Stock
+ −
8 Pin to 2 Pin Plus 5 Pin Cable For Heng Long RC Tanks
8-Pin and 2-Pin Plus 5-Pin Connector With Wire for the Heng Long Multifunction unit (version 5.3 or older). Also compatible with the Taigen V1, V2 and V3 series MFU. Includes: 1 x 8pin to 5pin/2pin Cable 
$2.50 $1.90
You save: $0.60
In Stock
+ −
3 Pin RC Servo Extension Lead Wire 42cm JR Futaba Style
High quality 420mm servo extension cord with strong, and well crimped JR Futaba Style connectors  
$4.00
In Stock
+ −
ElMod 10A Blade Fuse for ThinkTank Module PRO/ECO
ElMod Electronics
Replacement 10 amp fuse for ThinkTank Tank Module ECO/PRO. Requirements ThinkTank Tank Module PRO ThinkTank Tank Module ECO   Includes: 1 x 10A fuse
$2.00
In Stock
+ −
Heng Long 8 Pin Turret Connector v4
Heng Long
Replacement turret connector for your Heng Long 1/16 scale RC Tank v5.3 MFU 1 x 8 pin port 3 x 2 pin port 1 x 3 pin port
$4.00 $2.00
You save: $2.00
In Stock
+ −
Electrical Category
Only Show Instock
By Tank/Vehicle
By Brand