0Cart

Electrical

Sort by:
Price: High to Low
Show:
12
Metal Headlights with LED for 1/16 Heng Long or Taigen Tiger I RC Tank By MATO
(2)
Metal headlight with LED set for your Heng Long or Taigen 1/16 scale Tiger I RC Tank from MATO. Includes 2 x Metal Headlight 2 x LED with wires (wire colour may vary from image)
$8.00
In Stock
+ −
Metal Lower Hull Machine Gun w/LED For 1/16 Heng Long M4A3 Sherman
Metal Hull machine Gun .30 cal Browning 1919 style MG with LED for the Heng Long and Mato 1/16 Sherman RC tank. Includes: .30 cal Browning 1919 style MG with LED and wire x 1  
$8.00
In Stock
+ −
40mm x 40mm Cooling Fan 2 Pin for TK6.0/s TK6.1/s And TK7.0 MFU
Cooling fan for your Heng Long TK6.0/s, TK6.1/s, and TK7.0 series boards. Features: Color: black Noise level: 22 dB Fan dimension: 40 x 40 x 10 mm 2pin connector Rated Voltage: 12VDC,0.1A Fan Speed: 3000RPM(+/-10%)...
$8.00 $6.00
You save: $2.00
In Stock
+ −
On/Off Switch With Tamiya Connector for Heng Long Taigen 1/16 RC Tanks
Replacment On/Off switch set for your Heng Long or Taigen RC Tank. Includes: On/Off Switch 2pin cable w/connector 2pin cable with Tamiya Plug  Please note: NOT compatible with the Heng Long TK6.0/6.1 MFU electrics
$6.00
In Stock
+ −
Taigen Infrared Main Power Cable (Tamiya Plug) with Ground
Replacement main power cable for Heng Long, Taigen or Torro 1/16 RC tanks. This particular version has an extra ground cord (yes the cord is red), that connects to a Taigen infrared/recoil firing unit. This power cable is also compatible with non-IR tanks as well, simply tape off the extra...
$6.00
In Stock
+ −
Heng Long XT60 Male to Bullet Connector Lead For TK6.0s And TK7.0 Series MFU
Heng Long
This XT60 male to bullet connector cable allows you to use a battery pack with the XT60 connector on your TK6.0s and TK7.0 multifunction board. Compatible with: TK6.0s TK7.0  Not compatible with TK6.1/s or Tk7.1 boards.
$5.50
In Stock
+ −
Genuine Taigen IR Emitter & IR Receiver Cable
This is the cable used for infrared battling. It has a 5 pin JST-XH plug on one end for connecting to the Taigen or Heng Long motherboard, and a 3 pin JST-XH for the infrared receiver and infrared LED emitter on the other end. This cable is mainly used for replacements or Airsoft to Infrared...
$7.00 $5.00
You save: $2.00
In Stock
+ −
Heng Long Gearbox Cables For TK6 And TK7 Series Multifunction Boards
Heng Long
Replacment gearbox cables for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards Comptible with: TK6.0 | TK6.0s | TK6.1 | TK6.1s TK7.0 | TK7.1 Includes: 2 x Red and Black gearbox cable pairs (for one gearbox)
$5.00
In Stock
+ −
Heng Long 2 Pin DuPont-Style Connector With Wires For TK6.0/TK6.1/TK7.0/TK7.1 MFU
Heng Long
Replacement 2-pin DuPont-style connector with cable for LED1 to LED8 ports on the Heng Long TK 6 series and TK 7 series multifunction boards for RC Tanks. Compatible with: TK6.0 | TK6.0S | TK6.1 | TK6.1S TK7.0 | TK7.1 Includes: 2 x 2pin DuPont-style...
$5.00
In Stock
+ −
Heng Long IR Receiver Connector With Wire For TK7.0 Multifunction Boards
Heng Long IR Receiver Connector With cable for the 6 series and newer MFUs.  Suitable for the following Heng Long Multifunction boards: TK7.0 Includes: 3pin Plug with cabe and connector for TK7.0 Multifunction Boards
$5.00
In Stock
+ −
3 Pin RC Servo Extension Lead Wire 42cm JR Futaba Style
High quality 420mm servo extension cord with strong, and well crimped JR Futaba Style connectors  
$4.00
In Stock
+ −
Heng Long IR Emitter With Wires For TK6.0 TK7.0 Series Multifunction Boards
Heng Long
Replacment IR Emitter with cable for your Heng Long 1/16 scale RC Tank. Compatible with TK 6 series and TK 7 series multifunction boards.  Includes: 1 x IR Emitter
$4.00
In Stock
+ −
Electrical Category
Only Show Instock
By Tank/Vehicle
By Brand